Ballscrew Driven, Miniature Monocarrier Positioning Stages – 401XE Series

The 401XE tables use a highly integrated monocarrier as its drive train and guidance. Just 30mm wide, with strokes to 160mm and loads to 157N, its size and performance make it ideal for applications ranging from life science to electronic manufacturing.
The 401XE Series of linear positioners combines a rugged, steel U-channel body with an integrated precision ballscrew. The design of this stage is unique in that the guidance system and drive train are tightly integrated to one another – making this stage extremely compact, cost effective while providing high precision. This series of stages is available in 3 different profiles sizes to manage a variety of payloads, and can be easily configured into multi-axis systems. A variety of stepper motors have been preselected to match the performance of the 401XE to minimize the design effort. The 401XE has been applied in a number of applications ranging from the life sciences, electronics manufacturing, semiconductor as well as general machine building.

• Product Series: XE
• Profile Width: 30 mm
• Drive Axis Type: Ballscrew
• Screw Pitch: 2 mm
• Bearing Type: Integrated Ball Guide
• Maximum Stroke Length: 160 mm, 6.3 inch
• Maximum Operating Speed: 0.1 m/sec, 3.9 inch/sec
• Maximum Screw Speed: 50 RPS
• Maximum Acceleration: 20 m/sec2, 773 inch/sec2
• Bidirectional Repeatability: 10 micron, 0.39 thou
• Drive Train Efficiency Rating: 90 %
• Duty Cycle: 100 %
• Load Capacity: 157 N, 35 lb
• Inverted Load Capacity: 157 N, 35 lb
• Axial Load Capacity: 49 N, 11 lbs
• Maximum Breakaway Torque: 0.012 Nm, 1.69 oz-inch
• Maximum Running Torque: 0.011 Nm, 1.55 oz-inch
• Additional Protection Included: Optional Hard Cover (IP20)
• Specifications Met: Cleanroom Option (Class rating dependant on application)
• Feedback Type: None

Ballscrew Driven, Miniature Monocarrier Positioning Stages – 403XE Series

The 403XE tables use a highly integrated monocarrier as its drive train and guidance. Just 60mm wide, with strokes to 655mm and loads to 1569N, its size and performance make it ideal for applications ranging from life science to electronic manufacturing.
The 403XE Series of linear positioners combines a rugged, steel U-channel body with an integrated precision ballscrew. The design of this stage is unique in that the guidance system and drive train are tightly integrated to one another – making this stage extremely compact, cost effective while providing high precision. This series of stages is available in 3 different profiles sizes to manage a variety of payloads, and can be easily configured into multi-axis systems. A variety of stepper and servo motors have been preselected to match the performance of the 403XE to minimize the design effort. The 403XE has been applied in a number of applications ranging from the life sciences, electronics manufacturing, semiconductor as well as general machine building.

• Product Series: XE
• Profile Width: 60.5 mm
• Drive Axis Type: Ballscrew
• Screw Pitch: 5 mm, 10 mm
• Bearing Type: Integrated Ball Guide
• Maximum Stroke Length: 655 mm, 25.79 inch
• Maximum Operating Speed: 0.5 m/sec, 19.6 inch/sec
• Maximum Screw Speed: 50 RPS
• Maximum Acceleration: 20 m/sec2, 773 inch/sec2
• Bidirectional Repeatability: 5 micron, 0.2 thou
• Drive Train Efficiency Rating: 90 %
• Duty Cycle: 100 %
• Load Capacity: 1569 N, 352 lb
• Inverted Load Capacity: 1569 N, 352 lb
• Axial Load Capacity: 304 N, 68 lbs
• Maximum Breakaway Torque: 0.15 Nm, 21.24 oz-inch
• Maximum Running Torque: 0.1 Nm, 14.1 oz-inch
• Additional Protection Included: Optional Hard Cover (IP20)
• Specifications Met: Cleanroom Option (Class rating dependant on application)
• Feedback Type: None

Ballscrew Driven, Cross Roller Guided, Miniature Linear Positioner – MX45S Series

The MX45S ballscrew driven miniature cross roller linear stage is just 45mm wide. Offering high precision, stroke lengths of up to 25mm and a payload capacity of 68N, it is ideal for use in life science or optical adjustment applications.
Parker's MX45S miniature linear positioner delivers smooth motion due to its anti-cage creep, cross roller bearings for its guidance, and ballscrew drivetrain. Based on the MX80S design, The MX45S has an extremely compact design – measuring just 45 mm in width, and is ideal for space restricted applications in the life sciences or optics market. The MX45S can easily be configured into multi-axis configurations with standard transition brackets available.

• Product Series: MX
• Profile Width: 45 mm
• Drive Axis Type: Ballscrew
• Screw Pitch: 1 mm
• Bearing Type: Cross Roller
• Maximum Stroke Length: 25 mm, 0.98 inch
• Maximum Operating Speed: 0.03 m/sec, 1.18 inch/sec
• Maximum Screw Speed: 30 RPS
• Maximum Acceleration: 20 m/sec2, 773 inch/sec2
• Bidirectional Repeatability: 1 micron, 0.04 thou
• Drive Train Efficiency Rating: 90 %
• Duty Cycle: 100 %
• Load Capacity: 68.5 N, 15.4 lbs
• Inverted Load Capacity: 68.5 N, 15.4 lbs
• Axial Load Capacity: 40 N, 9 lbs
• Maximum Breakaway Torque: n/a
• Maximum Running Torque: 0.011 Nm, 1.5 oz-inch
• Additional Protection Included: None
• Specifications Met: –
• Feedback Type: Linear Encoder (sine, 0.1μm or 1μm resolution)
• Ingress Protection Rating: IP00

Ironcore Linear Motor Driven, Dual Square Rail Guided, Linear Positioner – MSR 80 Series

The mSR 80 is a high precision, miniature linear stage comprised of an ironcore linear motor, integrated high resolution feedback and precision square rail guidance. The mSR 80 measures just 80 mm wide by 25 mm tall.
The mSR 80 is a miniature, high precision linear positioner which uses dual precision grade square rails for its guidance, and an ironcore linear motor for its drive. The mSR 80 has an extremely compact design – measuring just 80 mm in width by 25 mm in height. Captured within this miniature profile is the stage's guidance, linear motor, linear encoder, as well as adjustable limit and home sensors – making this an ideal positioner for space restricted applications in the life sciences or optics market. The mSR 80 can easily be configured into multi-axis configurations.

• Product Series: MSR
• Profile Width: 80 mm
• Drive Axis Type: Linear Motor
• Screw Pitch: Ironcore Servo Motor
• Bearing Type: Dual Square Rail
• Maximum Stroke Length: 150 mm, 5.9 inch
• Maximum Operating Speed: 2000 m/sec, 78.74 inch/sec
• Maximum Acceleration: 29.4 m/sec2, 1158 inch/sec2
• Bidirectional Repeatability: 0.1 micron, 0.00393 thou
• Duty Cycle: 100 %
• Load Capacity: 78.5 N, 17.6 lbs
• Inverted Load Capacity: 78.5 N, 17.6 lbs
• Axial Load Capacity: 24 N, 5.4 lbs
• Maximum Breakaway Torque: –
• Additional Protection Included: None
• Specifications Met: Cleanroom (Class 1000 – Standard, Class 10 – Optional)
• Feedback Type: Linear Encoder (0.01μm, 0.1μm or 1μm resolution optical incremental / 1μm resolution magnetic / 1Vp-p Sine/Cosine)
• Ingress Protection Rating: IP00

Ironless Linear Motor Driven, Dual Square Rail Guided, Linear Positioner – T1D Series

The T1D ironless linear motor positioner has two square rails for guidance and a high resolution linear encoder. With strokes to 0.66m and a load capacity of 132N, this positioner uses the 110 series ironless motor – providing exetremely smooth motion.
The T series is a square rail guided high precision linear motor positioners. Utilizing the high performance, I-Force ironless linear motor as its drive the T1D positioner comes pre-engineered, in an easy to integrate, ready to run package with the I-Force 110 series motor, integrated feedback, guidance, and cable management. The principle design goal for these positioners is provide high performance in an economic package, while allowing for design flexibility to accommodate customization. The T series positioner is available in in 4 different stroke scalable frame sizes with either a single or two square rails to carry a wide variety of payloads. As a result, the T series has been applied in a number of high tech applications ranging from the life sciences, electronics manufacturing, and optics.

• Product Series: T Series (I-FORCE)
• Profile Width: 124.9 mm
• Drive Axis Type: Linear Motor
• Screw Pitch: Ironless Servo Motor
• Bearing Type: Dual Square Rail
• Maximum Stroke Length: 665 mm, 26.2 inch
• Maximum Operating Speed: 3000 m/sec, 118.11 inch/sec
• Maximum Acceleration: 49 m/sec2, 1930 inch/sec2
• Bidirectional Repeatability: 1 micron, 0.0393 thou
• Duty Cycle: 100 %
• Load Capacity: 132.44 N, 30 lb
• Inverted Load Capacity: 132.44 N, 30 lb
• Axial Load Capacity: 45.4 N, 10.2 lbs
• Maximum Breakaway Torque: –
• Additional Protection Included: None
• Specifications Met: Cleanroom (Class 1000 – Standard, Class 10 – Optional)
• Feedback Type: Linear Encoder (0.1μm, 0.5μm, 1μm or 5μm resolution optical incremental / 1μm or 5μm resolution magnetic / 1Vp-p Sine/Cosine)
• Ingress Protection Rating: IP00

Ironless Linear Motor Driven, Dual Square Rail Guided, Linear Positioner – T3D Series

The T3D ironless linear motor positioner has two square rails for guidance and a high resolution linear encoder. With strokes to 2.8m and a load capacity of 1059N, this positioner uses the 310 series ironless motor – providing exetremely smooth motion.
The T series is a square rail guided high precision linear motor positioners. Utilizing the high performance, I-Force ironless linear motor as its drive the T3D positioner comes pre-engineered, in an easy to integrate, ready to run package with the I-Force 310 series motor, integrated feedback, guidance, and cable management. The principle design goal for these positioners is provide high performance in an economic package, while allowing for design flexibility to accommodate customization. The T series positioner is available in in 4 different stroke scalable frame sizes with either a single or two square rails to carry a wide variety of payloads. As a result, the T series has been applied in a number of high tech applications ranging from the life sciences, electronics manufacturing, and optics.

• Product Series: T Series (I-FORCE)
• Profile Width: 190.5 mm
• Drive Axis Type: Linear Motor
• Screw Pitch: Ironless Servo Motor
• Bearing Type: Dual Square Rail
• Maximum Stroke Length: 2814 mm, 110.8 inch
• Maximum Operating Speed: 5000 m/sec, 196.85 inch/sec
• Maximum Acceleration: 49 m/sec2, 1930 inch/sec2
• Bidirectional Repeatability: 1 micron, 0.0393 thou
• Duty Cycle: 100 %
• Load Capacity: 1059.5 N, 240 lb
• Inverted Load Capacity: 1059.5 N, 240 lb
• Axial Load Capacity: 262 N, 589 lbs
• Maximum Breakaway Torque: –
• Additional Protection Included: None
• Specifications Met: Cleanroom (Class 1000 – Standard, Class 10 – Optional)
• Feedback Type: Linear Encoder (0.1μm, 0.5μm, 1μm or 5μm resolution optical incremental / 1μm or 5μm resolution magnetic / 1Vp-p Sine/Cosine)
• Ingress Protection Rating: IP00

Ironless Linear Motor Driven, Square Rail Guided, Linear Positioner – T1S Series

The T1S linear motor positioner has a single square rail for guidance and a high resolution linear encoder. With strokes to 0.7m and a load capacity of 111N, this positioner uses the 110 series ironless I-Force motor – providing extremely smooth motion.
The T series is a square rail guided high precision linear motor positioners. Utilizing the high performance I-Force ironless linear motor as its drive, the T1S positioner comes pre-engineered, in an easy to integrate, ready to run package with the 110 series motor, integrated feedback, guidance, and cable management. The principle design goal for these positioners is high performance in an economic package, while allowing for design flexibility to accommodate customization. The T series positioner is available in in 4 different stroke scalable frame sizes with either a single or two square rails to carry a wide variety of payloads. As a result, the T series has been applied in a number of high tech applications ranging from the life sciences, electronics manufacturing, and optics.

• Product Series: T Series (I-FORCE)
• Profile Width: 94.6 mm
• Drive Axis Type: Linear Motor
• Screw Pitch: Ironless Servo Motor
• Bearing Type: Single Square Rail
• Maximum Stroke Length: 726 mm, 28.6 inch
• Maximum Operating Speed: 3000 m/sec, 118.11 inch/sec
• Maximum Acceleration: 49 m/sec2, 1930 inch/sec2
• Bidirectional Repeatability: 1 micron, 0.0393 thou
• Duty Cycle: 100 %
• Load Capacity: 111 N, 25 lb
• Inverted Load Capacity: 111 N, 25 lb
• Axial Load Capacity: 45.4 N, 10.2 lbs
• Maximum Breakaway Torque: –
• Additional Protection Included: None
• Specifications Met: Cleanroom (Class 1000 – Standard, Class 10 – Optional)
• Feedback Type: Linear Encoder (0.1μm, 0.5μm, 1μm or 5μm resolution optical incremental / 1μm or 5μm resolution magnetic / 1Vp-p Sine/Cosine)
• Ingress Protection Rating: IP00

Ironless Linear Motor Driven, Square Rail Guided, Linear Positioner – T3S Series

The T3S ironless linear motor positioner has a single square rail for guidance and a high resolution linear encoder. With strokes to 2.8m and a load capacity of 706N, this positioner uses the 310 series ironless motor – providing exetremely smooth motion.
The T series is a square rail guided high precision linear motor positioners. Utilizing the high performance, I-Force ironless linear motor as its drive the T3S positioner comes pre-engineered, in an easy to integrate, ready to run package with the I-Force 310 series motor, integrated feedback, guidance, and cable management. The principle design goal for these positioners is provide high performance in an economic package, while allowing for design flexibility to accommodate customization. The T series positioner is available in in 4 different stroke scalable frame sizes with either a single or two square rails to carry a wide variety of payloads. As a result, the T series has been applied in a number of high tech applications ranging from the life sciences, electronics manufacturing, and optics.

• Product Series: T Series (I-FORCE)
• Profile Width: 158.75 mm
• Drive Axis Type: Linear Motor
• Screw Pitch: Ironless Servo Motor
• Bearing Type: Single Square Rail
• Maximum Stroke Length: 2844 mm, 112 inch
• Maximum Operating Speed: 5 m/sec, 196.85 inch/sec
• Maximum Acceleration: 49 m/sec2, 1930 inch/sec2
• Bidirectional Repeatability: 1 micron, 0.0393 thou
• Duty Cycle: 100 %
• Load Capacity: 706.32 N, 160 lb
• Inverted Load Capacity: 706.32 N, 160 lb
• Axial Load Capacity: 262 N, 589 lbs
• Maximum Breakaway Torque: –
• Additional Protection Included: None
• Specifications Met: Cleanroom (Class 1000 – Standard, Class 10 – Optional)
• Feedback Type: Linear Encoder (0.1μm, 0.5μm, 1μm or 5μm resolution optical incremental / 1μm or 5μm resolution magnetic / 1Vp-p Sine/Cosine)
• Ingress Protection Rating: IP00

Leadscrew Driven, Light Capacity Miniature Linear Positioner – LCR30 Series

The LCR 30 is a value priced, screw driven miniature linear actuator which is ideal for OEM applications, moving light payloads with moderate thrust. This 30mm wide device is available with strokes of up to 600mm and a load capacity of 90N.
The LCR (Light Capacity Rodless) is a belt or leadscrew driven miniature linear actuator that has been design to answer the needs of OEM instrument builder. Due to its design, the LCR is the ideal mechanical positioner for applications in the life science space requiring a high quality, miniature, and easy to use rodless linear actuator. Flexible sizes, drive train types, bearings and strokes make it the ideal building block to base an instrument design around. The LCR screw drive is ideal for applications requiring electronic control of light payloads and high thrust. This make the LCR screw drive ideal for applications in analytical instruments, laboratory automation, micro titer automation, and liquid handling. The LCR is also applicable to general purpose applications moving light payloads, and basic repeatability for point of purchase kiosks, part shuttling, and even conversion from rodless pneumatics to electric automation.

• Product Series: LCR
• Profile Width: 30 mm
• Drive Axis Type: Leadscrew
• Screw Pitch: 2 mm, 10 mm
• Bearing Type: Square Rail, Glider
• Maximum Stroke Length: 600 mm, 23.62 inch
• Maximum Operating Speed: 0.15 m/sec, 5.9 inch/sec
• Maximum Screw Speed: 15 RPS
• Maximum Acceleration: 20 m/sec2, 773 inch/sec2
• Bidirectional Repeatability: 100 micron, 3.94 thou
• Drive Train Efficiency Rating: 50 to 70 %
• Duty Cycle: 100 %
• Load Capacity: 90 N, 20 lb
• Inverted Load Capacity: 90 N, 20 lb
• Axial Load Capacity: 70 N, 15.7 lbs
• Maximum Breakaway Torque: 30 Nm, 4.24 oz-inch
• Maximum Running Torque: n/a
• Additional Protection Included: Steel Strip Cover
• Specifications Met: –
• Feedback Type: None
• Ingress Protection Rating: IP30

Precision Linear Motor Stage – XLM Series

The Parker XLM series is a precision machined, profiled guide linear positioner which is driven with linear servo motor technology and utilizes selectable levels of linear encoder technology that are configured to match the application need. For machinery or instrument builders who need smooth motion and high precision positioning, the XLM linear positioner provides micron level precision in three different profile widths from 125mm to 200 mm.

One of the main advantages offered by the XLM series is its modular design, allowing multiple axis assemblies to easily be assembled. Whether the application calls for a relatively simple XY configuration or a more complex multi-axis gantry. Integrated cable management helps to provide a clean and easy to install package, saving on the cost of additional components and the time to install them.

• Drive Axis Type: Linear Motor
• Maximum Stroke Length: 1500 mm
• Continuous Force: 127 N
• Peak Force: 414 N
• Repeatability: ± 0.5 micron
• Accuracy: ± 4 micron
• Load Capacity: 630 kg
• Maximum Surface Speed: 3 m/sec
• Maximum Acceleration: 3 g
• Ingress Protection Rating: IP30 Sealed option
• Specifications Met: CE, RoHS
• Bearing Type: Dual Square Rail
• Profile Width Range: 125 mm, 145 mm, 200 mm
• Feedback Type: Linear Encoder (0.01um, 0.1um, or 1um resolution optical incremental / 1V p-p Sin/Cos / 5, 50nm BISSC-C absolute
• Additional Protection Included: Optional Hard Cover, Optional Strip Seal
• Motor Type: Ironless Linear

Linear Positioning Stages – P5MD Series (Feed Escapement)

The P5MD is a feed escapement, designed to be an effective mechanism for separating parts fed from a track or conveyor. The body is made from 7075-T6 aircraft quality aluminum hard-coat anodized to 60 RC with PTFE impregnation. The dynamic components are precision ground and hardened for wear resistance and long life. The assembly has slip fit dowel holes in the body for precision applications and is sealed to repel contaminants. The design incorporates adjustable retract stops and a locking key to ensure part separation and eliminate jams. Sensor mounting slots and magnet are standard.

• Operating pressure: 44 to 102 psig (3 to 7 bar )
• Temperature range: -30° to 180° F (-35° to 80° C)
• Thrust force: 111 to 400 N
• Parts escaped per minute: 85 to 150

ZP200 Ballscrew Driven, Square Rail Guided, Vertical Lift Positioning Table

The ZP200 is a precision, wedge style stage which is ideal for vertical positioning applications. With a travel range of 25mm and a payload capacity of 734N, this 200mm wide table is driven with a precision ballscrew, using square rails for its guidance.

• Profile Width: 200 mm
• Drive Axis Type: Ballscrew
• Screw Pitch: 5 to 20 mm
• Bearing Type: Dual Square Rail
• Maximum Stroke Length: 25 mm (vertical), 0.98 inch (vertical)
• Maximum Operating Speed: 0.44 m/sec (vertical), 17.3 inch/sec (vertical)
• Maximum Screw Speed: 60 RPS
• Maximum Acceleration: 7.2 m/sec2 (vertical), 278 inch/sec2 (vertical)
• Bidirectional Repeatability: 3 micron (vertical), 0.12 thou (vertical)
• Drive Train Efficiency Rating: 90 %
• Duty Cycle: 100 %
• Load Capacity: 734 N, 165 lb
• Inverted Load Capacity: 734 N, 165 lb
• Maximum Breakaway Torque: 0.15 Nm, 21.24 oz-inch
• Maximum Running Torque: 0.13 Nm, 18.4 oz-inch
• Specifications Met: Cleanroom (Class 1000, 10)
• Feedback Type: Linear Encoder (0.1μm, 0.5μm or 1μm resolution)
• Ingress Protection Rating: IP00

Optomechanical Focusing Nano Positioner – ZFA Series

The Parker ZFA Series is an Optomechanical Focusing Nano Positioner that's engineered for applications requiring nanometer-level stability and ultra-low settling times. This high-precision positioner features a crossed roller guided, voice coil driven system with advanced linear encoder technology, ensuring optimal performance for demanding tasks. Its compact form factor of 95 x 90 x 36 mm houses a robust mechanism capable of supporting objective masses up to 2 kg with an optional external counterbalance.

• Drive Axis Type: Linear Motor
• Maximum Stroke Length: 9 mm
• Continuous Force: 4 N
• Peak Force: 10 N
• Repeatability: +/- 250 Nm
• Accuracy: +/- 4 μm
• Maximum Acceleration: Load dependent
• Specifications Met: CE, ROHS
• Feedback Type: Digital Incremental (Differential), 1V p-p Sin/Cos Incremental (Differential)
• Resolution: 2.5 Nm
• Load Capacity: With optional external counterbalance: 2,250 g, With internal counterbalance: 1,050 g

Industrial Rotary Tables – RM Series

RM Rotary Stages offer an unparalleled combination of high accuracy and high load capacity. These rotary stages utilize a precision worm gear and incorporate an oversized preloaded cross roller bearing, offering exceptional stiffness and load capacity.

• Product Type: Rotary Positioner
• Drive Axis Type: Worm Gear
• Feedback Type: Encoder (optional)
• Maximum Output Speed: 30 RPM
• Maximum Output Torque: 70 to 664 lb-inch, 8 to 75 Nm
• Bearing Type: Cross Roller
• Axial Load Capacity: 220 to 2220 lbs, 978 to 9875 N
• Repeatability: 30 arc-sec

Miniature High Precision Direct Drive Rotary Stage – mPR Series

The mPR series is a miniature precision direct drive rotary stage with integrated high precision rotary bearing, high resolution rotary encoder, and 3 phase AC servo motor. It has been engineered to deliver a combination of modularity, flexibility, and performance in an extremely compact package. The mPR is available in two form factors – 80mm and 104mm diameters. The combination of size, high precision, and all the features mentioned above make the mPR the ideal positioner for a number of high tech industries. The mPR's low profile and high precision make it ideal for applications in metrology systems, laser processing/machining, electronics manufacturing, and semiconductor manufacturing. The mPR 80 has common mounting feature to that of the MX80, and mSR 80/100, and the mPR 100 size has common mounting features to that of the 404XR for complete multi-axis systems.

• Product Type: Direct Drive Rotary Positioner
• Drive Axis Type: Direct
• Feedback Type: Optical Encoder
• Maximum Output Speed: 300 RPM
• Maximum Output Torque: 8 lb-inch, 54.9 lb-inch, 0.9 Nm, 6.2 Nm
• Bearing Type: Cross Roller
• Axial Load Capacity: 9 lbs, 26.5 lbs, 40 N, 118 N
• Repeatability: ± 1 to ± 11 arc-sec
• Input Voltage: 24 to 340 VDC