Nycoil | Tube Fittings - All Air, Inc.

Tube Fittings

We offer Nycoil Tube Fittings in standard and metric sizes. Ready to use, compact, one-piece fittings for use with most thermoplastic tubing. Designed to be used with no additional tube support.

Installation is easy – no tools are required.

To connect, simply push the tubing into the fitting until it bottoms. Unlike many other Push-To-Connect Fittings, you won’t have to struggle to release the tubing. To disconnect, all you have to do is push the collar down and pull the tubing out.

Product Lineup

Push-To-Connect Fittings

Nickel Plated Brass Push-to-Connect Tube Fittings

Ready-to-use compact one-piece fitting for use with most thermoplastic tubing. This fitting is specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important. No special tools are needed for assembly; just insert the tubing until it bottoms.
Push-to-Connect is designed to be used with no tube support. Radial claws on the stainless steel grab ring grip the tubing securely to provide retention.
The outside diameter of the tubing to be used with the fitting is marked on the release button.
Working Pressure: 0 to 200ºF at up to 300 psi depending on tubing being used.

Composite Push-to-Connect Tube Fittings – Inch

Composite Push-to-Connect Tube Fittings – Metric

This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications: -4ºF to +175ºF at up to 290 psi depending on tubing being used.

Push-to-Connect Flow Controls

The compact body size of our flow control valves make them ideal for small circuits where space is limited. Our highly sensitive adjusting screws allows fine settings to meet the precise demands of any application. The locking nut will accurately hold the required setting even under high vibration conditions. “Push-In” connections allow easy and quick connections to or disconnections from nylon, polyethylene and 95A durometer polyurethane tubing.

Pressure Range: 15 to 145 psi
Temperature Range: 30° to +160°F
Working Fluid: Compressed Air

Pipe Fittings

All pipe fittings threads are made to Dryseal standards.
Working Pressure: From -65ºF to +250ºF at 1000 psi
Brass pipe fittings meet SAE J530 and SAE J531 specifications.