High Performance DC Servo Motor – RS Series

RS-series high performance DC servo motors provide excellent low-speed function and very long service life. With low-speed torques up to 13Nm and speeds to 3000 min-1, they have options of tacho, encoder or resolver feedback, plus brake and 2nd shaft

Specifications:

• Frame Size: 39mm | 52mm | 68mm | 83mm | 97mm | 120mm
• Continuous Torque: 0.05 … 13 Nm, 0.44 … 115 lb-inch
• Peak Torque: 0.14 … 42 Nm, 1,24 … 371 lb-inch
• Rated Speed: 2000 … 3000 RPM
• Input Voltage: 20.7 … 105VDC
• Motor Pole Count: 4
• Feedback Type: Tacho | Encoder | Resolver
• Compatible Parker Drive: RTS
• Specifications Met: CE marked (except RS6)
• Ingress Protection Rating: IP40 (RS1-RS4) | IP54 (RS5-RS6)
• Holding Brake Included: Optional
• Shaft Type: Smooth (RS1-RS4) | Keyway (RS5-RS6) | 2nd Shaft (rear)

General Purpose Brushless Servo Motors (Encoder Feedback) – ME-Series

Available in 70-265mm frame sizes, ME motors are designed for applications where high dynamic performance and the utmost reliability are crucial. ME motors have encoder feedback.

Specifications:

• Maximum Output Speed: up to 10000 RPM
• Shaft Size: Metric: Ø > 40 – 60 mm, Metric: Ø > 30 – 40 mm, Metric: Ø > 20 – 30 mm, Metric: Ø > 15 – 20 mm, Metric: Ø > 1 – 15 mm
• Product Series: ME
• Mounting Type: PCD: > 200 – 300 mm, PCD: > 100 – 200 mm, PCD: > 50 – 100 mm, PCD: 1 – 50 mm, Pilot Ø: > 100 – 200 mm, Pilot Ø: > 50 – 100 mm, Pilot Ø: 1 – 50 mm
• Product Type: Electric Motor
• Technology: Electromechanical
• Product Style: Brushless Servo
• Operating Temperature: 14 to 104 °F, -10 to +40 °C
• Frame Size: 70mm | 105mm | 145mm | 205mm | 265mm
• Continuous Torque: 0.5 – 269 Nm, 4.4 – 2380 lb-inch
• Peak Torque: 2.8 – 857 Nm, 24.8 – 7585 lb-inch
• Rated Speed: 0 – 7500 RPM
• Input Voltage: 230VAC | 400-480VAC
• Feedback Type: Incremental Encoder | EnDat Absolute Encoder (single-turn) | EnDat Absolute Encoder (multi-turn) | Hiperface Absolute Encoder (single-turn) | Hiperface Absolute Encoder (multi-turn)
• Compatible Parker Drive: TPD-M | SLVD-N | HIDRIVE
• Specifications Met: CE marked | UL For size 145 and 205
• Ingress Protection Rating: IP64 | IP65
• Holding Brake Included: Optional
• Cooling Method: Air-Cooled / Natural Convection | Air-Cooled / Forced Ventilation (ME105/145/205)
• Shaft Type: Smooth | Keyway | Second Shaft

General Purpose Brushless Servo Motors (Resolver Feedback) – MB-Series

Available in 56-265mm frame sizes, MB motors are designed for applications where high dynamic performance and the utmost reliability are crucial. MB motors have resolver feedback.

Specifications:

• Maximum Output Speed: up to 10000 RPM
• Shaft Size: Metric: Ø > 40 – 60 mm, Metric: Ø > 30 – 40 mm, Metric: Ø > 20 – 30 mm, Metric: Ø > 15 – 20 mm, Metric: Ø > 1 – 15 mm
• Product Series: MB
• Mounting Type: PCD: > 200 – 300 mm, PCD: > 100 – 200 mm, PCD: > 50 – 100 mm, PCD: 1 – 50 mm, Pilot Ø: > 100 – 200 mm, Pilot Ø: > 50 – 100 mm, Pilot Ø: 1 – 50 mm
• Product Type: Electric Motor
• Technology: Electromechanical
• Product Style: Brushless Servo
• Operating Temperature: 14 to 104 °F, -10 to +40 °C
• Frame Size: 70mm | 105mm | 145mm | 205mm | 265mm
• Continuous Torque: 0.5 – 269 Nm, 1.8 – 2380 lb-inch
• Peak Torque: 1.3 – 857 Nm, 11.5 – 7585 lb-inch
• Rated Speed: 0 – 10000 RPM
• Input Voltage: 230VAC | 400-480VAC
• Feedback Type: Resolver
• Compatible Parker Drive: TPD-M | SLVD-N | HIDRIVE
• Specifications Met: CE marked | UL For size 145 and 205
• Ingress Protection Rating: IP64 | IP65
• Holding Brake Included: Optional
• Cooling Method: Air-Cooled / Natural Convection | Air-Cooled / Forced Ventilation (MB105/145/205)
• Shaft Type: Smooth | Keyway | Second Shaft

PM-DD Precision Direct Drive Rotary Servo Motor Series

Parker’s MPW stainless steel servo motor is the ideal solution for applications requiring high pressure, caustic, washdown. The cylindrical housings are made from 300 series stainless and the motors are sealed to IP69K and certified to NSF169

Specifications:

• Product Style: Rotary / Synchronous
• Frame Size: 135mm, 170mm, 230mm, 290mm, 360mm
• Continuous Output Power: 0.06 – 2.5 kW
• Continuous Torque: 3 – 160 Nm, 26 – 1416 lb-inch
• Peak Torque: 9 – 480 Nm, 80 – 4248 lb-inch
• Rated Speed: 150 – 200 RPM
• Input Voltage: 100-120VAC, 230VAC
• Compatible Feedback Device: BISS-C Absolute Encoder
• Compatible Parker Drive: P
• Ingress Protection Rating: IP40
• Cooling Method: Air-Cooled / Natural Convection
• Shaft Type: Hollow
• Specifications Met: CE

MPJ-Series High Power/Increased Inertia Brushless Servo Motors

Available in 92-142mm frame sizes, MPJ motors are high inertia versions of the MPP-series and offer a perfect solution for inertia matching without the need for any additional mechanical devices. Parker can provide custom modifications to all MPJ motors.

Specifications:

• Frame Size: 92mm | 100mm | 115mm | 142mm
• Continuous Torque: 1.5 – 33 Nm, 13.7 – 293 lb-inch
• Peak Torque: 4.3 – 94 Nm, 38.2 – 832 lb-inch
• Rated Speed: up to 5000 RPM
• Input Voltage: 230VAC | 400-480VAC
• Feedback Type: 2000 ppr Incremental Encoder | EnDat Absolute Encoder (multi-turn) | Hiperface Absolute Encoder (single-turn) | Hiperface Absolute Encoder (multi-turn) | Resolver
• Compatible Parker Drive: Compax3 | ARIES
• Specifications Met: CE marked | UL/cUL listed
• Ingress Protection Rating: IP64 | IP65
• Holding Brake Included: Optional
• Cooling Method: Air-Cooled / Natural Convection
• Shaft Type: Smooth | Keyway
• Custom Versions Available: Yes

BE-Series High Power-Density Brushless Servo Motors

Available in NEMA 16, 23 and 34 frame sizes, BE motors use an exposed stator lamination design to provide both quiet operation and a very high performance from a small package size. Parker can provide custom modifications to all BE motors.

Specifications:

• Frame Size: NEMA16 | NEMA23 | NEMA34
• Continuous Torque: 0.15 – 4.86 Nm, 1.3 – 43 lb-inch
• Peak Torque: 0.45 – 14.64 Nm, 4 – 129.5 lb-inch
• Rated Speed: up to 5000 RPM
• Input Voltage: 120VAC | 230VAC | 80VDC
• Feedback Type: 2000 ppr Incremental Encoder (standard) | 5000 ppr Incremental Encoder | Resolver
• Compatible Parker Drive: Compax3 | ARIES | ViX
• Specifications Met: CE marked
• Ingress Protection Rating: IP40
• Holding Brake Included: Optional (BE34 only/custom option on BE23)
• Cooling Method: Air-Cooled / Natural Convection
• Shaft Type: Smooth | Flat | Keyway (BE23/BE34 only)
• Custom Versions Available: Yes

Low-Cogging Brushless Servo Motors – NX-Series

NX motors are designed to provide low cogging torque and smooth operation. A large set of torque/speed characteristics, options and customization possibilities are available, as well as CE and UL marking certification

Specifications:

• Ingress Protection Rating: IP64, IP65, IP44
• Shaft Type: Keyway, Smooth
• Compatible Parker Drive: SLVD-N, PSD1, AC890, AC30, Compax3
• Cooling Method: Air-Cooled / Forced Ventilation (NX860V), Water-Cooled (NX860W), Air-Cooled / Natural Convection
• Shaft Size: Metric: Ø > 30 – 40 mm, Metric: Ø > 20 – 30 mm, Metric: Ø > 1 – 15 mm, Metric: Ø > 15 – 20 mm
• Maximum Output Speed: up to 10000 RPM
• Mounting Type: PCD: > 100 – 200 mm, PCD: > 50 – 100 mm, Pilot Ø: > 100 – 200 mm, PCD: 1 – 50 mm, Pilot Ø: > 50 – 100 mm
• Feedback Type: Absolute multi turn Hiperface DSL®, Absolute single turn Hiperface DSL®, Hiperface Absolute Encoder (single-turn), Hiperface Absolute Encoder (multi-turn), Sensorless, Resolver
• Frame Size: 70mm, 56mm, 92mm, 120mm, 155mm
• Technology: Electromechanical
• Specifications Met: UL/cUL, CE
• Product Type: Electric Motor
• Product Style: Brushless Servo
• Input Voltage: 400-480VAC, 230VAC
• Operating Temperature: -15 to +40 (-40 on request) °C, 5 to 104 (-40 on request) °F
• Continuous Torque: 2 – 90 Nm, 18 – 797 lb-inch
• Peak Torque: 6,6 – 137 Nm, 58 – 1212 lb-inch
• Rated Speed: 0 – 7000 RPM
• Holding Brake Included: Optional

Low-Inertia Brushless Servo Motors (for use with Compax3/PSD1 Servo Drives) – SMH-Series

The SMH series brushless servo motors have been designed to combine cutting-edge technology with extremely high performance. Utilising innovative ‘Salient Pole’ technology, featuring Neodymium-Iron-Boron magnets uniquely encapsulated to the motor shaft, SMH synchronous servo motors can achieve very high accelerations and withstand high overloads without any risk of demagnetisation or detachment of the magnets. Additionally the motor’s dimensions are considerably reduced, offering significant advantages in terms of specific torque and dynamic performance. Compared to traditional-technology brushless servo motors, the specific torque of SMH serrvo motors is approximately 30% higher and rotor inertias are extremely low, making it especially suited to highly dynamic applications.
Specifications:

• Ingress Protection Rating: IP65, IP67 (SMH170 only), IP64
• Shaft Type: Keyway, Smooth
• Feedback Type: Hiperface Absolute Encoder (single-turn), Incremental Encoder, Hiperface Absolute Encoder (multi-turn), Resolver
• Compatible Parker Drive: PSD1, Compax3
• Shaft Size: Metric: Ø > 30 – 40 mm, Metric: Ø > 1 – 15 mm, Metric: Ø > 20 – 30 mm, Metric: Ø > 15 – 20 mm
• Maximum Output Speed: up to 7500 RPM
• Mounting Type: PCD: > 200 – 300 mm, PCD: > 100 – 200 mm, PCD: 1 – 50 mm, PCD: > 50 – 100 mm, Pilot Ø: > 50 – 100 mm,
• Pilot Ø: 1 – 50 mm, Pilot Ø: > 100 – 200 mm
• Frame Size: 60mm, 82mm, 100mm, 115mm, 142mm, 170mm, 40mm
• Specifications Met: UL/cUL listed (SMH60-142 for torque between 1.4 to 15 Nm), CE marked
• Input Voltage: 400-480VAC, 230VAC
• Technology: Electromechanical
• Operating Temperature: -10 to +40 °C, 14 to 104 °F
• Product Type: Electric Motor
• Product Style: Brushless Servo
• Continuous Torque: 0.19 – 60 Nm, 1.68 – 531 lb-inch
• Peak Torque: 0.75 – 190 Nm, 6.64 – 1682 lb-inch
• Rated Speed: 0 – 7500 RPM
• Holding Brake Included: Optional
• Cooling Method: Air-Cooled / Natural Convection

Explosion Proof (ATEX Zone 1) Brushless Servo Motors – EX-Series

The EX series is a range of permanent magnet explosion-proof brushless servo motors designed for use in explosive atmospheres. Featuring robust explosion-proof housings, EX synchronous servo motors are capable of bearing internal explosions with no risks of propagation to the neighbouring environment. The EX series of servo motors are characterized by excellent motion quality, dynamic acceleration/deceleration capabilities and high torque output over a wide speed range. Various winding variants and numerous options are available to offer maximum flexibility. Different versions are available, conforming to European, Chinese or Korean safety standards.
Specifications:

• Ingress Protection Rating: IP64, IP65
• Shaft Type: Keyway, Smooth
• Feedback Type: Hiperface Absolute Encoder (single-turn), Hiperface DSL® Absolute Encoder (multi-turn), Hiperface DSL® Absolute Encoder (single-turn), Hiperface Absolute Encoder (multi-turn), Sensorless, Resolver
• Compatible Parker Drive: SLVD-N, PSD1, Compax3
• Specifications Met: CCC, ATEX / IECEx / KOSHA, CE marked
• Shaft Size: Metric: Ø > 30 – 40 mm, Metric: Ø > 15 – 20 mm, Metric: Ø > 20 – 30 mm, Metric: Ø > 1 – 15 mm
• Maximum Output Speed: up to 6800 RPM
• Frame Size: 92mm, 120mm, 155mm, 70mm
• Mounting Type: Pilot Ø: > 100 – 200 mm, PCD: > 100 – 200 mm, PCD: > 50 – 100 mm, Pilot Ø: > 50 – 100 mm
• Input Voltage: 400-480VAC, 230VAC
• Technology: Electromechanical
• Operating Temperature: -20 to +60 (with derating) °C, -4 to 140 (with derating) °F
• Continuous Torque: up to 35 Nm, up to 310 lb-inch
• Peak Torque: 6.6 – 137 Nm, 58 – 1213 lb-inch
• Rated Speed: up to 7600 RPM
• Holding Brake Included: Optional
• Cooling Method: Air-Cooled / Natural Convection

FM Series – Parker Servo Motor for Film Line

The FM series servo motor is a high-performance AC servo motor tailored to the needs of customers and the market, which supports position control and provides an efficient and easy wiring system. The motor provides high speed at low speed, various feedback types, shaft types, flange size, and power. In addition, the servo motor is used in common with 220v and 380v.
The 3-phase AC servo motor is a permanent magnet synchronous motor (PMSM), natural cooling, and protection grade IP65, which operates mostly in the servo drive and in various environments. FM Servo Motors offers users a broad industry that offers users the unique energy-saving features, as well as improved reliability and extended service life benefits associated with smooth start and stop of regularly cycled rods.

Specifications:

• Rated Torque: 0.64 ~ 48 Nm
• Current: 1.2 ~ 17 A
• Compatible Parker Drive: FL20 Series – Parker Servo Drives for Film Line
• Mounting Type: 60 ~ 180 Flange
• Shaft Type: Keyway shaft with C hole
• Feedback Type: 4-core 23-bit Incremental encoder
• Optional Accessories: Without brake and fan

Ironcore Linear Motors – MI Type

Parker’s MI Type Ironcore linear motor is a product that significantly increases product efficiency. It is a product that can be used economically while easily achieving control goals.

Specifications:

• Profile Width: 53, 68, 98, 158 mm
• Track Length: Modular: Unlimited / Single Piece: 92 ~ 732 mm
• Continuous Force: 57 ~ 3185 N
• Peak Force: 170 ~ 7898 N
• Continuous Output Power: 35 ~ 716 W
• Peak Output Power: 387 ~ 6448 W
• Attraction Force: 319 ~ 14460 N
• Feedback Type: Digital Hall Sensor, n/a

RIPPED R7 Ironcore Linear Motors

RIPPED R7 Ironcore Linear Motors offer peak forces upto 1761N, ideal for high force industrial applications. The 70mm wide ironcore design features patented anticog technology, removing the roughness associated with traditional ironcore linear motors

Specifications:

• Profile Width: 70 mm
• Track Length: Modular: Unlimited / Single Piece: 160 or 240 mm, Modular: Unlimited / Single Piece: 6.2 or 9.4 inch
• Continuous Force: 154 to 462 N, 35 to 104 lbf
• Peak Force: 587 to 1761 N, 132 to 396 lbf
• Continuous Output Power: 180 to 540 W
• Peak Output Power: 3600 to 10800 W
• Attraction Force: 1557 to 4671 N, 350 to 1050 lbf
• Feedback Type: Digital Hall Effect Device (optional)

RIPPED R16 Ironcore Linear Motors

RIPPED R16 Ironcore Linear Motors offer peak forces upto 7435N, ideal for high force industrial applications. The 160mm wide ironcore design features patented anticog technology, removing the roughness associated with traditional ironcore linear motors

Specifications:

• Profile Width: 160 mm
• Track Length: Modular: Unlimited / Single Piece: 180 or 240 mm, Modular: Unlimited / Single Piece: 7.0 or 9.4 inch
• Continuous Force: 743 to 2230 N, 167 to 501 lbf
• Peak Force: 2478 to 7433 N, 557 to 1671 lbf
• Continuous Output Power: 353 to 1060 W
• Peak Output Power: 7065 to 21195 W
• Attraction Force: 7117 to 21351 N, 1600 to 4800 lbf
• Feedback Type: Digital Hall Effect Device (optional)

ML18 Ironless Linear Servo Motor

The ML18 is an ironless linear motor for applications where a compact design is required. At a height of 35 mm and width of 18 mm, the ML18 offers a more compact solution for your application needs. Three coil lengths are available providing a peak force up to 50.1 N and are optimized to run on 24 to 80 volts DC.
The ML18 incorporates the Parker I-Force I-beam shape with overlapping windings allowing for high power density, improved heat removal, and added structural stiffness. In addition, the ironless linear motor design has no attractive forces allowing for zero cogging, rapid accelerations, and easy installation.
Specifications:

• Profile Width: 18 mm
• Track Length: 80, 120 mm
• Continuous Force: 16.7 N
• Peak Force: 50.1 N
• Continuous Output Power: 50 W
• Peak Output Power: 1000 W
• Attraction Force: 0 N
• Specifications Met: RoHS, CE
• Feedback Type: Hall Effect

I-FORCE 210 Ironless Linear Motors

Parker’s I-Force 210 Ironless Linear Motors offer high forces and rapid accelerations in a compact package. With continuous forces ranging from 30.7 N (6.9 lbf) to 110 N (24.8 lbf) and peak forces ranging from 137 N (30.8 lbf) up to 494 N (111 lbf), the I-Force family offers a superior combination of performance and size. The I-Force patented I-beam shape with its overlapping windings allows for a higher power density in a smaller motor, improved heat removal, and added structural stiffness. In addition, the ironless (or air core) linear motor design has no attractive force toward the magnets. This allows for easy installation and zero cogging during motion. Ultra high-flex cables come standard with I-Force motors. In addition, Parker offers modular magnet tracks for unrestricted travel length. Incredibly smooth motion, high precision and high force density make the I-Force linear motors an ideal solution for your demanding positioning requirements.
Specifications:

• Profile Width: 31.7 mm
• Track Length: Modular: Unlimited / Single Piece: 121.92 to 1219 mm, Modular: Unlimited / Single Piece: 4.8 to 48 inch
• Continuous Force: 30.7 to 110.3 N, 6.9 to 24.8 lbf
• Peak Force: 137 to 494.2 N, 30.8 to 111.1 lbf
• Continuous Output Power: 45 to 147 W
• Peak Output Power: 905 to 2940 W
• Attraction Force: 0 N, 0 lbf
• Cooling Method: Internal Air Cooling Manifold (option)
• Feedback Type: Imbedded Digital Hall Effect Device (optional)
• Specifications Met: RoHS

I-FORCE 410 Ironless Linear Motors

Parker’s I-Force 410 Ironless Linear Motors offer high forces and rapid accelerations in a compact package. With continuous forces ranging from 233 N (52.4 lbf) to 878 N (197.5 lbf) and peak forces ranging from 1041 N (234.1 lbf) up to 3928 N (883 lbf), the I-Force family offers a superior combination of performance and size. The I-Force patented I-beam shape with its overlapping windings allows for a higher power density in a smaller motor, improved heat removal, and added structural stiffness. In addition, the ironless (or air core) linear motor design has no attractive force toward the magnets. This allows for easy installation and zero cogging during motion. Ultra high-flex cables come standard with I-Force motors. In addition, Parker offers modular magnet tracks for unrestricted travel length. Incredibly smooth motion, high precision and high force density make the I-Force linear motors an ideal solution for your demanding positioning requirements.
Specifications:

• Profile Width: 50.8 mm
• Track Length: Modular: Unlimited / Single Piece: 171 to 1622 mm, Modular: Unlimited / Single Piece: 6.7 to 63.8 inch
• Continuous Force: 233 to 878 N, 52 to 197 lbf
• Peak Force: 1041 to 3928 N, 234 to 883 lbf
• Continuous Output Power: 142 to 506 W
• Peak Output Power: 2835 to 10125 W
• Attraction Force: 0 N, 0 lbf
• Cooling Method: Internal Air Cooling Manifold (option) | Liquid Cooling (option)
• Feedback Type: Imbedded Digital Hall Effect Device (optional)
• Specifications Met: RoHS