Valves
Product Lineup
Solenoid Valve SVB
Standard type Solenoid Valve which is focusing on basic performance and providing good cost-performance.
Download a CatalogSolenoid Valve SVA
Lightweight and small-sized, yet large capacity.
Effective sectional area of 18mm2 for 16mm width valve is secured.
Solenoid Valve SVR
Compact, yet keeps large capacity.
Featuring external pilot air specification, controlled pressure can be applied from 0MPa.
Change Valve
Push-in fitting type three-way changeover valve.
Hand (Shut-off) Valves
Hand Valve turns on and off air pressure to pneumatic devices.
Three-directional control valve, which discharges the residual pressure, and two-directional control valve is available.
Ball Valve (Mini Series)
Ball Valve turns on and off air pressure to pneumatic devices.
Ball Valve (20 & 60 Series)
Ball Valve turns on and off air pressure to pneumatic devices.
Water can be admitted.
Ball valve SUS304
Anti-corrosion ball valve is ideal for use in special environments.
Stainless steel SUS304 is used for metal parts.
Ball Valve SUS316 Equivalent (10 Series)
SUS316 equivalent material (SUS316 or CF8M) for fluid contact part.
Chemical and mixed gas can be used as fluid medium.
1 piece, reduced bore type.
Ball Valve SUS316 Equivalent (30 Series)
SUS316 equivalent material (SUS316 or CF8M) for fluid contact part.
Chemical and mixed gas can be used as fluid medium.
3 pieces, full bore type.
Mechanical Valve
This push-type valve turns on and off the input of air pressure.
The operating force is not affected by the strength of air pressure owing to the spool valve mechanism.
The most standard Speed Control Valve for driving devices.Speed controller Push-lock type with Indicator
Speed setting can be checked with indicator.
Easy adjustment due to its liner characteristics.
Speed Controller Large-Flow type
Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder.
Speed Controller Low-Flow type
Low-flow type Speed Controller for driving device. Best suitable for the fine speed adjustments of low-speed cylinders.
Recessed Screw Flow Control Valve
It prevents unnecessary manual adjustments during the operations.
2-Stage Speed Controller
It enables same control as the cylinder with shock absorber.
Speed Control Valve SUS316 Stainless Steel
Flow control valve made of stainless steel SUS316 which has excellent anti-corrosivity
Speed Controller SUS303 (Resists Corrosivity)
Best suitable for operating where strength is required or in corrosive atmosphere.
Speed Controller PP
PP (Polypropylene) is applied for the body material to adapt to clean environment.
Speed Controller Spatter
A fire-resistant resin (Equivalent to UL V-0) is applied for the body material to adapt to spatter environment.
Protective Cover at both needle and joint parts to protect from sparks.
Speed Controller Brass
Not only the body but the release ring is made of brass, thus best suitable for high heat and spatter environments.
Constant Flow Speed Controller
This speed controller fixes the operation speed of driving device.
It is best suited for use with mass-produced dedicated machines.
Best suitable for high-speed drive cylinder.Throttle (Needle) Valve
Throttle valve controls the operation speed of a pneumatic device and the transmission of air pressure signals.
The flow rate can be adjusted while the air is flowing.
Needle Valve SUS316 Stainless Steel
Needle valve made of stainless steel SUS316 which has excellent anti-corrosivity.
Throttle (Needle) Valve SUS316
Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion.
Fluororesin Needle Valve
Suitable for flow rate adjustment in semiconductor manufacturing process.
Throttle (Needle) Valve PP
PP (Polypropylene) is applied for the body material to adapt to clean environment.
Throttle (Needle) Valve Brass
Not only the body but the release ring is made of brass, thus best suitable for high heat and spatter environments.
Exhaust Port Needle Valve (Speed Control Mufflers)
This Exhaust Needle Valve controls the exhaust flow rate.
Orifice Fittings (Tamper-Proof)
Push-in fitting type fixed orifice joint. It controls air flow.
Push-lock type Pressure Regulator
Pre-set Pressure Regulator
For applications of tamper-proof or that no pressure adjustment is needed
Check Valve
Check Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level.
Low Cracking Pressure/Plastic Check Valve
Securing of air flow becomes possible at low pressure that the conventional valve does not operate.
SUS304 PP Water Use Check Valve
Check Valve PP is applicable to water (Fluid).
PP (Polypropylene) is applied for the body material to adapt to clean environment.
Silencer
Silencer, connected to the exhaust port of a device, suppresses the exhaust noise.